Isolators / Distributors

I. Overview

The LU-G12 one-input two-output analog voltage/current signal isolator and distributor is suitable for connecting field two-wire transmitters, DC voltage sources, DC current sources, etc., and, after isolation and conversion, distributes the 4~20mA/1~5V analog signals they generate into two channels for transmission to the control system or other unit combination instruments.
The isolator is powered by an independent DC power supply, with isolation between power supply, input and output.

II. Technical parameters

● Input

Current input: two-wire transmitter, 4~20mA DC current signal

Input impedance: 100Ω

Transmitter supply capability: ≥16V at 20mA

Limiting current input: 24mA

Voltage input: 1~5V and other DC voltage signals

Input impedance: 1MΩ

● Output

Current output: 4~20mA

Load resistance: ≤600Ω

Voltage output: 1~5V

Load resistance: ≥100KΩ

● Power supply

Power supply voltage: 20~35VDC

Power supply protection: reverse connection protection, overvoltage and overcurrent protection

Current consumption: ≤130mA (24V, 600Ω load)

● General technical parameters

Accuracy: ≤0.2%FS (typical)

Temperature drift: ≤0.01%FS/°C

Response time: 1ms to reach 90% of the final value

Power-on stabilization time: ≤3s

Insulation resistance: ≥100MΩ

Insulation strength: 1500VAC; 1min

Operating temperature: -20~+60°C