Products > Industrial Intelligent Instruments > I/O Module > LU-S14016 Analog Input/Output Module

LU-S14016 Analog Input/Output Module

Summary:

LU-S14016 offers input acquisition of single-channel strain gage mV/mA signal, output of single-channel driving voltage 0-10V. The A/D input optical isolation, D/A output optical isolation and more than 3000V power isolation, may effectively prevent from ground looping and high-voltage surging. LU-S14016 also offers 4 channel digital outputs, Open-Collector Outputs(with max. load) is 30 V,30 mA. The digital outputs can control SSR, accordingly control heater, pump and other electronic device. Channel 0 & 1 digital output also have the function of upper limit and lower limit alarm, and the threshold value is downloaded to EEPROM of the module from the host computer. The alarm function can be remotely controlled to be allowable or prohibitive, when it is enabled, the digital output channel-1 will show the state of upper limit alarm, and the digital output channel-o will show the lower limit alarm state. LU-S14016 supports Modbus protocol, RS-485 communication, has built-in optical coupler and provides 3000VDC isolation voltage. LU-S14016 also has functions of surge protection, surge absorption, thunder-proof etc.

Main Feature:
Excellent EMC performance

1. High Anti-Electrostatic, test result:
  Air Discharge: ± 12 KV
  Contact Discharge: ± 6 KV
2. Easy to pass 3 KV Electrical Fast Transient/Burst Immunity Test (EFT test)
3. Lighting Surge Immunity: ± 2 KV
4. Radiated & Noise Immunity Test
With noise interference simulated by multi-circle wire(Impulse amplitude: 1 KV, bandwidth: 1 µs) by 10 minutes, no abnormal phenomena
5. Voltage Dips, Short Interruptions, and Voltage Variations Immunity Test 
  Gradual change of voltage: ± 20% Ut,
Gradual change of time: 2 s ± 20%
  Voltage Dips and Short Interruptions: 40% Ut 
The duration time: 5 s
Strain Input
● Resolution: 16 bits
● Channel: 1 channel differential
● Input Type: mV and mA
● Input Range: ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V, ±20 mA
● Isolation Voltage: 3000 VDC
● Input Surge Protection: Yes
● Sampling Rate: 10 sample/sec
● Input Impedance: 20MΩ
● Bandwidth: 2.62 Hz
● Accuracy: ±0.05% or better
● Zero Drift: ±6 µV/°C
● Full Span Drift: : ±25 ppm/°C
● CMR @ 50/60 Hz: 150 dB
● NMR @ 50/60 Hz: 100 dB

Analog Output
● Channels: 1
● Output Type: V /mA
● Output Range: 0~10 V / 0~20 mA
● Driving Current: 30 mA
● Isolation Voltage: 3000 VDC
● Accuracy: 0.05% of FSR
● Drift: ±5 ppm/°C

Digital Output
● Channels: 4
● Open-Collector Outputs(with max. load) : 30 V, 30 mA
Power Dissipation: 300 mW

Communication
● Mode: RS-485
● Communication Protocol: Modbus
● Isolation Voltage: 3000 VDC
● Surge-protection & Thunder-proof: Yes

Watchdog Timer Built in

Power
● Power: Unregulated +10 ~ +30 VDC
● Power Consumption: 2.2W

After-sale service Pre sales consultation

Login  |  Register  Please login to ask question!




  • LU-S14520 Isolated RS-232 to RS-485 Converter

  • LU-S14510 Isolated RS-485 Repeaters

  • LU-S14060 Relay Output Module