1. Brief Introduction

The LU-C5000 may be 1 to 32 channels program PID control, the program control curve may reach 200 segments.

2. The main technical parameters

◆      Display: 10.4 inch TFT active color LCD, resolution 640×480, high light , none view angle.

◆      Input accuracy: ± (0.2%F.S+1) digit

◆input type: Standard voltage 0-5V, 1-5V

standard current 0-10mA, 4-20mA

T.C:  K, S, B, T, E, J, Wre325, N

RTD:  Pt100, Cu50

Special input: R, Wre526, mV signal, other

◆      output types: Switch output: Relay contact output (resistance 250VAC/0.8A or 250VAC/3A)

 linear current output: 0-10mA, 4-20mA, 0-20mA (software free set)

linear voltage output: 0-5V, 1-5V, 0-10V (indicates when ordering)

silicon-controlled zero-crossing trigger 

the SSR trigger (12V/50mA)

DC12V/50mA

DC24V/50mA

DC5V/50mA

transform output: 4-20mA (the load <650Ω)、1-5V

               0-10mA（the load <1000Ω）、0-5V

Communication connection: RS232 or RS485

storage medium: U disk/256M, U disk/512M

◆      Record time: adopts 256M electron hard disk

Record interval: 1, 2, 5, 10, 15, 30, 60, 120, 240, 300seconds for set

Record data: 32 pens,

Latest 21 days/32 pens (1 second interval) ~ 6300 days/ 32 pens (5 minutes interval)

◆T.C cold-junction compensate error:  ±1℃

◆cut off protection time: the data can be stored forever when the electricity is cut off for it adopts FLASH MEMORY, it can run accurately when cut off if hard clocks is equipped.

◆Power source: Switch power supply 85VAC-264VAC, 50Hz±5%

◆Ambient temperature: 0-45 ℃

◆ambient humidity: 0-85%RH

After-sale service Pre sales consultation